How do I set up Zeroshell?

How do I set up Zeroshell?

1. Step 1: Get your NICs installed and setup. Install the Gigabit PCI Nic.
2. Step 2: Web Console: Setup a Profile and Activate It.
3. Step 3: PPPOE (Optional) and NAT.
4. Step 4: DHCP, DNS, Virtual Servers.
5. Step 5: HAVP: (Transparent) HTTP Antivirus Proxy.
6. Step 6: VPN and Users.
7. Step 7: QoS.

What is Zeroshell router?

Zeroshell is a Linux based distribution dedicated to the implementation of Router and Firewall Appliances completely administrable via web interface. Zeroshell is available for x86/x86-64 platforms and ARM based devices such as Raspberry Pi.

How do I install Zeroshell router on Linux?

Select “Linux” as the Type and select “Other Linux 64-bit” for the Version.

1. Allocate the virtual machine 256MB of shared memory and 8GB hard disk space.
2. Then, head into the Storage settings and attach the Zeroshell installation ISO to the virtual CD-ROM drive.
3. You are now ready to boot and install Zeroshell.

What distro is Zeroshell?

Linux distribution
Unsourced material may be challenged and removed. Zeroshell is a small open-source Linux distribution for servers and embedded systems which aims to provide network services. Its administration relies on a web-based graphical interface; no shell is needed to administer and configure it.

How do I make a captive portal on my router?

Configure Captive Portal Settings

1. Open Manage.
2. Select Configuration > Device Configuration > SSID Profiles.
3. Select an existing SSID profile or create a new profile.
4. Expand the Captive Portal section.
5. Select the Enable Captive Portal check box to display a portal page to be shown to clients on the guest network.

How do I setup my Raspberry Pi as a router?

In order to configure your Raspberry Pi as a wired router, you need the following things:

1. A Raspberry Pi single board computer.
2. A Raspberry Pi power adapter or a 2.1A USB power bank.
3. A SD card reader for flashing Raspbian OS onto the microSD card.
4. A microSD card.
5. A network switch.
6. Ethernet cables.

How do I configure my Raspberry Pi as a router?

Use Raspberry Pi 3 As Router

1. Step 1: Video.
2. Step 2: Boot-up Raspberry Pi.
3. Step 3: Upgrading Raspberry Pi.
4. Step 4: Installing Hostadp and Bridge-utils.
5. Step 5: Disable DHCP Config for Wlan0 and Eth0.
6. Step 6: Creating Bridge Br0.
7. Step 7: Edit /etc/network/interfaces.
8. Step 8: Edit /etc/hostapd/hostapd.

How to configure network adapters in Zeroshell?

Using BACKUP button we can create a copy of the selected configuration file on the pc we are using to browse Zeroshell administrative homepage . Network adapters configuration: Once prepared disk and created the first configuration file we can configure the ip address of the network adapters, by clicking SETUP nad NETWORK tag :

What ports should I forward from Zeroshell to the server?

In your case you should instruct ZeroShell to forward the 80 and 443 TCP ports to the web server, the 25 TCP to the mailserver and the 22 TCP port to the server that offers the secure shell. Obviously, since they are private addresses on the LAN you must also enable NAT.

What is Zeroshell Linux?

Zeroshell is a Linux based distribution dedicated to the implementation of Router and Firewall Appliances completely administrable via web interface. Zeroshell is available for x86/x86-64 platforms and ARM based devices such as Raspberry Pi. Some advanced features of Zeroshell are: Load Balancing and Failover of Multiple Internet Connections.

How to set up virtual server on Zeroshell?

Using ROUTER , choose VIRTUAL SERVER : We must chose the interface , the protocol and the port listening for this service on Zeroshell system. Then we must set where is the service in our secure network: 192.168.0.100. It’s the webserver publishing our homepage on port 80 TCP.